0.8mm BR Grade Birch Laser Plywood, 600mm x 400mm sheet

This is a high quality 0.8mm Flexible Birch Plywood sheet (laserply) produced in Finland which is suitable for a wide range of applications and is suitable for laser cutting. It is bendy and can be flexed to create curved designs. This is BR 'veneer' grade Birch Plywood. This is similar to B grade material, with knots that would typically not exceed 7mm to 8mm in diameter. It shows the natural look of the wood and will show natural colour variations. These thinner plywoods are used in specialist applications and tend to have a slightly higher quality feel. The surface of the material is typically of a smoother finish than that that of most plywoods. This plywood uses an EN314-2 Class 1 glue which is suitable for interior (dry) conditions. Interior glue is generally considered the preferred option for materials that are to be laser cut. We use interior glues because exterior glues can cause a more obvious 'burnt' look on and around the area that is cut. Features: High quality (laserply) material with a smoother surface than typical plywood. Interior grade glue. 3 ply plywood. Contents: 1 x 0.8mm BR Grade Birch Laser Plywood (laserply), 600mm x 400mm Sheet. Dimensions: Length: 600mm. Width: 400mm. Height: 0.8mm.