Electro-Fashion, Sewable Light Kit, Red Flat Sewable LEDs

This fantastic new Electro-Fashion kit from Kitronik has been specially designed so that electronics can easily be used in textile applications - without soldering! The kit includes conductive thread (which is a thread that can be used like cotton thread but conducts electricity like a wire), our own custom designed Sewable Coin Cell Holder, one coin cell battery, and two ultra slim, pre-mounted, easy sew E-Textile LEDs. The coin cell holder has the benefit of large, easy-to-stitch connection points (no more difficult little holes!) and clearly marked terminals that show the battery polarity. The LEDs are less than 3mm tall and are also clearly marked with '+' and '-' to indicate which is the positive and which is the negative connection. The PCBs are double sided, making the conductive thread connection very reliable (see example picture below). Features: Ultra Slim Sewable LEDs. Easily add lights to textiles projects. Easy-to-stitch connection points. Clearly marked '+' and '-' connections.. No soldering required. Contents: 1 x Coin Cell Holder. 2 x Electro-Fashion® LEDs (Blue, Green, Red, White, Orange or Yellow). 1 x 2m Conductive Thread. 1 x CR2032 3V Coin Cell. LED Colour Variants: Blue - Product Code: 2735 Green - Product Code: 2736 Red - Product Code: 2737 White - Product Code: 2738 Orange - Product Code: 2768 Yellow - Product Code: 2769 Dimensions: Sewable Coin Cell Holder Length: 34mm. Sewable Coin Cell Holder Width: 20mm. Sewable Coin Cell Holder Height: 4.5mm. LED Length: 15mm. LED Width: 6.5mm. LED Height: 2.7mm. CR2032 Battery Height: 3.2mm. CR2032 Battery Diameter: 20mm. Requires: Scissors. Needles.