Slab Roller

Slab Roller.

This heavy-duty machine is constructed from steel legs and a heavy-duty Formica table top plate bed.

To operate the slab roller, turn both the adjustable knobs on top of the frame together, a little at a time, to lower the roller and create pressure on the block of clay. Then, rotate the large flywheel or turn handle on the side of the machine. The Slab Roller is supplied with two canvas blankets which are used to sandwich your block of clay.

We advise that you stretch the width of your block of clay so that when it is rolled you get width as well as length. You can also cut your clay block into slices and lay the long edge of each slice together and the rolling action will join them into a flat piece. This will speed up working times for any busy ceramics or 3D modelling department.

Rolls slabs up to 760mm wide and a maximum depth of 2.5 inches.

Please note, due to the item weight this product will be supplied in four boxes on a pallet and will require assembly.

Instructions supplied and can be viewed here.

Slab roller measures: 910 x 1010 x 1210mm (H x W x L)